Loading... Please wait...


CCI VPR - Pre-Sensitized Photopolymer Emulsion - Plastisol and Waterbased Inks

Hover over image to zoom

  • CCI VPR - Pre-Sensitized Photopolymer Emulsion - Gallon
  • CCI VPR - Pre-Sensitized Photopolymer Emulsion - Quart
  • CCI VPR - Pre-Sensitized Photopolymer Emulsion - Tech Sheet
Calculated at checkout

 Product Description


CCI VPR - Pre-Sensitized Photopolymer Emulsion - for Plastisol and Waterbased Inks

Description:  ProChem® VPR is a one part, ready-to-use textile emulsion, and is recommended for plastisol and water based inks. It offers durability and excellent image quality. Due to the product's high solids it yields a better coating, sharper edges and excellent resolution. ProChem® VPR is pre-sensitized and does not require the addition of Diazo. This product saves time as it exposes very fast. Reclaiming the screen when using ProChem® VPR is easy with CCI Stencil Removers, which are available in concentrate and ready-to-use formulas.  THIS IS THE SAME EMULSION WE USE ON ALL OUR PRE-COATED AND PRE-BURNED SCREENS!


  • Violet Colored
  • Virtually pinhole and fish eye free
  • Extremely Durable for long print runs
  • Good resolution and edge definition
  • 38% solids

Uses:  Can be used for faster exposure times when printing with Plastisol Inks or Waterbased Inks.

Instructions:  VPR does not require any diazo mix. Emulsion comes ready to use. Lightly stir before use and apply to a degreased, clean and dry screen, using a scoop coater for easy application. Allow emulsion to fully dry, in a light safe environment, before exposure.

Exposure:  Many factors affect exposure times. When using any emulsion for the first time, we recommend running a “step wedge or exposure test” to figure out your exact exposure times. This simple test will save you time, money and frustration. After figuring out your exposure time, try to eliminate all variables, such as location, temperature, coating thickness, emulsion type, so your exposure process can be easily repeatable.

Clean-up / Reclaiming: Emulsion Removers - Any Kor-Chem or NTL Emulsion Remover. 

Storage:  Store in a cool area, away from heat. A refrigerator is a great storage tool for emulsion and can slightly extend shelf life. DO NOT FREEZE. Emulsion that has been frozen will not work properly and should be discarded. Do not allow air or outside light into emulsion container, as this can decrease product life, or ruin the emulsion.

Shelf Life:  Opened: 6-8 months. Unopened: up to 1 year.

NOTE:  Environmental conditions such as temperature and humidity can cause emulsion to expire more rapidly. *ONLY USE THIS EMULSION IN A LIGHT SAFE ENVIRONMENT.


 Find Similar Products by Tag

 Find Similar Products by Category

Vendors Other Products

You Recently Viewed...


What's News


Copyright 2019 NeverTheLess Screen Printing Supply. All Rights Reserved.

Click the button below to add the CCI VPR - Pre-Sensitized Photopolymer Emulsion - Plastisol and Waterbased Inks to your wish list.